TABLE A2.

I-Driver neuron parameters

I-Driver Parameter	Value
Time constant for h	2000 ms
Half-voltage for h	−51 mV
NaP conductance	3.0 nS
Slope for h	5.0 mV
Half-voltage for activation	−43.0 mV
Slope for activation	−6.0 mV
Reset voltage @ h = 0	−42.0 mV
Threshold voltage	−37.0 mV
Applied current (Iapp)	0.0 pA
Noise amplitude	0.1 nS

The I-Driver neuron was modeled using “hybrid IF conditional burster model” derived from Breen et al. (2003). All parameters in this model correspond to Breen et al. model; h is inactivation variable of the persistent sodium (NaP) channel The following modifications of the original Breen et al. model were made: the Threshold voltage parameter was set constant (not dependent on h) and reset of h with each spike Δh (h) = −0.00185h.