Table 2.
Implant characteristics
| Parameter | Value |
|---|---|
| Duraloc® 100 cup design | 78 |
| Enduron™ polyethylene liner material | 78 |
| Polyethylene liner geometry | |
| 4 mm lateralized | 62 |
| Standard | 13 |
| 10° lip | 3 |
| Terminal sterilization | |
| Gas plasma | 63 |
| Gamma-in-air standard dose | 11 |
| Gamma-barrier standard dose | 3 |
| Gamma-barrier low dose | 1 |
| Shelf storage duration (years) for 11 gamma-in-air sterilized liners* | 1.5 ± 1.5 (0.05–4.9) |
| Femoral head material | |
| Cobalt-chrome | 70 |
| Ceramic | 8 |
| Femoral head diameter | |
| 32 mm | 3 |
| 28 mm | 71 |
| 26 mm | 3 |
| 22 mm | 1 |
| Cup outer diameter | |
| 48 mm | 2 |
| 50 mm | 1 |
| 52 mm | 19 |
| 54 mm | 18 |
| 56 mm | 15 |
| 58 mm | 15 |
| 60 mm | 5 |
| 62 mm | 1 |
| 64 mm | 2 |
| Hole eliminator | |
| Plug with positive stop | 54 |
| Plug without positive stop | 15 |
| Not used | 9 |
| Porous-coated stem fixation | 78 |
* For continuous variables, the data are expressed as mean ± standard deviation, with range in parentheses.