Table 2007.05E.
Chromatographic conditions for LC/MS ion trap
HPLC column | Zorbax SB-C18, 3 mm id × 150 mm, Agilent | |||
---|---|---|---|---|
Mobile phase A | 0.1% (v/v) formic acid and 0.1% (w/v) ammonium acetate in DI water | |||
Mobile phase B | 0.1% (v/v) formic acid and 0.1% (w/v) ammonium acetate in methanol | |||
Pump program | ||||
Time, min |
%A |
%B |
Gradient curve |
|
0 | 80 | 20 | NAa | |
20 | 0 | 100 | 1b | |
21 | 80 | 20 | 1 | |
25 | 80 | 20 | NA | |
Column temperature, °C | 40 | |||
Flow rate, mL/min | 0.5 | |||
Injection volume, μL | 30 | |||
Sample introduction |
Ion trap |
|
|
|
Mode | ||||
Mass range scan | m/z 80 to 370 | |||
Discharge current, μA | 5 | |||
Heated capillary temperature, °C | 150 | |||
Vaporization temperature, °C | 450 | |||
Sheath gas setting | 70 | |||
Aux gas setting |
20 |
|
|
|
Ions to be monitored for LC/MS ion trap | ||||
Compound |
Parent ion (m/z) |
Ions |
Isolation width (m/z) |
Relative collision energy, % |
Aristolochic acid I | 359 | 298 | 2 | 30 |
Aristolochic acid I | 298.0 (from product ion above) | 251, 252, 268 | 2 | 35 |
NA = Not applicable.
A gradient curve of 1 indicates a linear transition.