Skip to main content
. Author manuscript; available in PMC: 2010 Mar 28.
Published in final edited form as: Sens Actuators B Chem. 2009 Mar 28;137(1):379–385. doi: 10.1016/j.snb.2008.10.027

Figure 7.

Figure 7

Stability of the SWV response of 1-NNP (20 ppm in 1M NaCl) measured at a PEN flexible SPE before and after repeated 5 min 180° bending. The average signal stability is counted from the heights of the peaks and represents measurements at 5 electrodes where 100% corresponds to the unstressed electrode (A). The SW voltammograms of the supporting electrolyte and of 20 ppm 1-NNP before and after bend are shown in Fig. 7B (a and b, respectively). SWV parameters, as in Figure 6.