Skip to main content
. Author manuscript; available in PMC: 2009 Aug 4.
Published in final edited form as: Opt Express. 2008 Aug 4;16(16):12190–12200. doi: 10.1364/oe.16.012190

Fig. 1.

Fig. 1

(a) Reflectance mode instrumentation for Raman measurements is shown using a ring/disk geometry. The ring diameters can be varied to sample multiple depths for tomographic reconstruction. (b) Transmission mode configuration is shown using a rectangular array of collection fibers at 180 degrees from the line source illumination. Multiple projections across the tissue can be obtained by rotating the sample with respect to the source-collection fiber setup.