Table 5.
Rc | N°d | Chemical Shift (ppm) | Integrated Area | ||||||
---|---|---|---|---|---|---|---|---|---|
0.02M | 0.04M | 0.02M | 0.04M | ||||||
Peak 1e | Peak 2 | Peak 1 | Peak 2 | Peak 1 | Peak 2 | Peak 1 | Peak 2 | ||
4 | 6 | 6.34 | 4.62 | 6.31 | 4.80 | 0.56 | 0.49 | 0.52 | 0.51 |
6 | 7 | 6.33 | 4.53 | 6.34 | 4.77 | 0.75 | 0.73 | 0.70 | 0.94 |
8 | 8 | 6.34 | 4.66 | 6.34 | 4.88 | 0.72 | 0.62 | 0.76 | 0.50 |
10 | 9 | 6.34 | 4.58 | 6.35 | 4.73 | 0.58 | 0.50 | 0.61 | 0.57 |
1H NMR experiments were conducted with four TFK-sulfoxides using a Varian Mercury 300 MHz NMR. All samples were prepared in CDCl3 that had been stored over K2CO3(s). Each compound was measured at 0.019 M and 0.038 M.
Relative area units as determined from the 1H NMR analysis.
R refers to the length of the alkyl chain as shown in Figure 1.
Individual compound numbers.
Peak 1 and Peak 2 refer to the hydroxyl groups from the gem-diol as shown in Figure 5.