Skip to main content
. Author manuscript; available in PMC: 2009 Oct 5.
Published in final edited form as: J Biomech. 2006 Jan 19;40(1):55–63. doi: 10.1016/j.jbiomech.2005.11.013

Fig. 2.

Fig. 2

Displacement data with time obtained for the full mechanical testing protocol for a typical (A) explant and (B) motion segment. Displacement point’s d1, d2, d3, d4, and d5 refer to the displacement after 4 h at 0.04 MPa, after 4 h at 0.2 MPa, after 6 h of recovery following the 0.2MPa load, after 4 h at 1.0MPa and after 6 h of recovery following the 1.0MPa load, respectively. These markers are slightly offset from data for increased visibility.