Skip to main content
. 2009 Sep 30;46(3):199–204. doi: 10.3340/jkns.2009.46.3.199

Fig. 1.

Fig. 1

Steps of pressure measurement. After the cannula tip has been inserted to distal end of transverse carpal ligament, catheter is then inserted A : There are two marks, spaced 1 cm, each other, on the catheter. Then the catheter is inserted so that 1 cm passed after the second mark on the catheter B : Pressure is measured after the removal of cannula. Pressure at D3 is measured C : Note the second mark of the catheter (arrow).