Table 2.
Specific stimulation parameters used to record the individual responses shown in Figure 2 and 3 are listed. Also listed are the response latencies and peak to peak amplitudes for each subject. Electrode 1 refers to the electrode used for stimulation during the first 300 ms of the experimental trials. Electrode 2 is the stimulating electrode used in the second 300 ms of the experimental trials.
| Stimulation Parameters | Onset Response | EACC | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Subject ID |
Rate used for T&C levels |
Electrode 1 | Electrode 2 | EP Stimulus Level |
N1 latency (ms) |
P2 latency (ms) |
N1-P2 amplitude (µV) |
N1 latency (ms) |
P2 latency (ms) |
N1-P2 amplitude (µV) |
||||
| E1 | T-level | C- level |
E2 | T-level | C- level |
|||||||||
| M66 | 1000Hz | 10 | DNT | 222 | 15 | DNT | 222 | 222 | 95.0 | 195.0 | 12.00 | 92.0 | 188.0 | 6.37 |
| M54L | 1200Hz | 5 | 164 | 225 | 10 | 170 | 232 | 225 | 102.0 | 185.0 | 8.17 | 105.0 | 184.0 | 5.83 |
| M58R | 720Hz | 10 | 133 | 175 | 15 | 130 | 169 | 170 | 118.0 | 196.0 | 5.25 | 112.0 | 195.0 | 2.69 |
| M52L | 720Hz | 10 | 149 | 218 | 15 | 150 | 218 | 205 | 112.0 | 216.0 | 6.47 | 108.0 | 183.0 | 3.15 |
| M52R | 720Hz | 10 | 146 | 215 | 15 | 152 | 222 | 205 | 116.0 | 206.0 | 5.18 | 100.0 | 209.0 | 2.43 |
| R13 | 1000Hz | 14 | DNT | 185 | 19 | DNT | 189 | 185 | 125.0 | 259.0 | 5.45 | 114.0 | 266.0 | 4.31 |
| R15 | 900Hz | 17 | 155 | 207 | 21 | 157 | 206 | 205 | 120.0 | 184.0 | 3.69 | 108.0 | 173.0 | 2.75 |
| R80 | 900Hz | 15 | 134 | 204 | 20 | 135 | 201 | 210 | 134.0 | 224.0 | 6.85 | 119.0 | 191.0 | 2.39 |
| R82 | 1000Hz | 15 | DNT | 205 | 20 | DNT | 207 | 205 | 129.0 | 212.0 | 5.99 | 118.0 | 245.0 | 3.16 |
| R47R | 900Hz | 10 | 121 | 181 | 15 | 119 | 184 | 180 | 107.0 | 211.0 | 3.13 | 114.0 | 207.0 | 1.59 |
| Mean | 115.8 | 208.8 | 6.22 | 109.0 | 204.1 | 3.47 | ||||||||
| S.E. | 3.84 | 6.96 | 0.79 | 2.64 | 9.35 | 0.49 | ||||||||