Table 1a.

Details of lab processed indirect fiber composites

Name	Composition	Types / architecture	Processing method
Vectris Launched in 1996 by Ivoclar	Matrix- BisGMA and TEGDMA(24-39 Wt %) decandioldimethacrylate UDMA - 0.3&0.1wt%. preimpregnated E &R glass - 60Wt% for pontic and around 45-50% for the other materials.	Frame, Single, and Pontic. Single and Frame are glass-fibre woven E fibers.(Mesh) VectrisPontic unidirectional R glass-fibres (Unidirectional)	Initial polymerization -1 min with light curing unit
			final polymerization -light and heat curing unit (Targis power) for 25 minutes.
FiberKor (Jeneric/Pentron)	S-glass fibers(60%) in 100% bis-GMA matrix	FibreKor 2K strips contain 2,000 individual fibers, FibreKor4K strips contain 4,000 fibres and FibreKor 16K strips contain 16,000 fibres. (Unidirectional)	Initial polymerization -light cuirng unit (alpha lightI)for 1minute followed by light-heat curing for 15 minute in(alpha lightII) 45
EverStick net (Stick tech Ltd)	E-glass fibers impregnated with PMMA.	Mesh type glass fibers	The wetting of fibers is done with stick resin and polymerization as for fiberKor.