TABLE 1.
Substrate | K0.5 (mM) | kcat (s−1) | kcat/K0.5 (s−1·mM−1) | nHe | mHf | Ksi (mM) |
---|---|---|---|---|---|---|
1,3-Dibromopropanec | 2.15 ± 0.15 | 1.47 ± 0.08 | 0.69 | 1.0 | —g | — |
1,3-Dichloropropanec | >4 | >0.008 | < 0.002 | 1.0 | — | — |
1,3-Diiodopropanec | 0.20 ± 0.03 | 1.2 ± 0.1 | 6.0 | 3.5 ± 1.6 | — | — |
1-Bromohexanec | 0.14 ± 0.09 | 1.7 ± 0.1 | 12.20 | 1.0 | — | — |
1-Chlorohexanec | 0.07 ± 0.02 | 0.039 ± 0.004 | 0.58 | 1.27 ± 0.23 | — | — |
1-Iodohexaned | 0.63 ± 0.25 | 0.26 ± 0.09 | 0.42 | 2.4 ± 1.0 | 11.6 ± 6.0 | 1.7 ± 0.1 |
All measurements were performed in 100 mM glycine buffer with pH 8.6 at 37°C.
Plus or minus standard error of the fit.
All parameters were calculated using the Hill equation: (where S is the substrate concentration and vlim is the limiting rate at the saturating substrate concentration).
All parameters were calculated using the Hill equation with substrate inhibition: .
Hill coefficient.
Hill coefficient in inhibitory mode.
—, not applicable for the scheme used in a fit.