Table 2.
Variation analysis of a complete randomized block design using Factorial design - model nets.
| Variable | Denier | Hole Shape | Texturising | Denier X Hole Shape | Denier X Texturizing | Hole Shape X Texturizing | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weight/m2 (g) | 657 | <0.0001 | 28.1 | <0.0001 | 47.2 | <0.0001 | 11.2 | 0.0021 | 5.6 | 0.0238 | 8.7 | 0.0058 |
| Bursting Strength (Pa) | 87.8 | <0.0001 | 100 | <0.0001 | 13.0 | 0.0010 | 13.5 | 0.0008 | 1.0 | 0.95 | 16.7 | 0.0003 |
| Height at Burst (mm) | 33.3 | <0.0001 | 154 | <0.0001 | 40.6 | <0.0001 | 0.04 | 0.84 | 2.1 | 0.16 | 0.02 | 0.88 |
| Tensile strength Length | 10.7 | 0.0025 | 0.24 | 0.6 | 0.0 | 0.95 | 13.8 | 0.0007 | 12.5 | 0.0013 | 20.4 | 0.0001 |
| Tensile Strength Width | 272 | <0.0001 | 2.8 | 0.10 | 11.2 | 0.0019 | 3.8 | 0.0595 | 5.8 | 0.026 | 1.8 | 0.186 |
The first value per cell is the Error of Variance (F) value and the second the Probability (P) value. The first column shows the dependent variables and the following 3 columns how the independent variables influence the dependent. The last three columns analyze interactions between independent variables in their effect on the dependent variable.