Skip to main content
. Author manuscript; available in PMC: 2012 Jun 15.
Published in final edited form as: J Polym Sci B Polym Phys. 2011 Jun 15;49(12):832–864. doi: 10.1002/polb.22259

Figure 3.

Figure 3

PLGA scaffolds with villi architecture generated by indirect three-dimensional printing with villus diameter, height and intervillus spacing of (a) 0.5, 1, 0.5 mm; (b) 0.5, 1, 1 mm; (c) 1, 1, 1 mm, respectively. (reprinted from 126 with permission from Wiley.)

HHS Vulnerability Disclosure