Skip to main content
. Author manuscript; available in PMC: 2012 Nov 1.
Published in final edited form as: Ann Biomed Eng. 2011 Aug 2;39(11):2669–2682. doi: 10.1007/s10439-011-0363-9

TABLE 1.

Values of model parameters used in the ABM and CMM to simulate the bio-chemo-mechanical response of a mouse abdominal aorta to altered blood pressure. These values were inferred from the literature and deemed either to be reliable or to be reasonable based on prior parameter sensitivity studies; hence, they were fixed and not optimized in the minimization procedure to increase congruency. For detailed information on the constitutive relations or rules in which the parameters occur, please see the original papers15,18.

Prescribed (Fixed) Parameters

CMM References
    Prestretches and Elastic Parameters
  Ghe=1.4, Ghc=1.08, Ghm=1.3 [12]
  ce = 58.8 KPa, c1c=560.4kPa, c1m=12.7kPa, c2c=22, c2m=3.5
    Muscle Activation and Shear-Constrictor Ratio
  TM = 150 KPa, λM = 1.6, λ0 = 0.83 [36]
  CB = 0.68 [18]
    Initial Mass Fractions and Half-lives
  ϕc(0) = 0.44, ϕe(0) = 0.28 ϕm(0) = 0.28 [37,38]
  Khm=180day1,Khc=180day1 [2,39]

      ABM

      Growth Factors
   δPDGF = 0.15, αPDGF = 0.84, ΚPDGF = 0.42, nPDGF = 1.24 [40,41]
MPDGF = 0.78 pg cell−1 6hr−1
      Vasoactive Factors
   δET−1 = 0.60, αET−1 = 0.40, κET−1 = 3.63, nET−1 = 1.68 [42,43]
   MET−1 = 0.01 pg cell−1 6hr−1
      Removal Factors
   δMMP−2 = 0.03, αMMP−2 = 0.52, κMMP−2 = 2.0E – 06, nMMP−2 = 2.84 [32,33]
   MMMP−2 = 1 pg cell−1 6hr−1, DMMP−2 = 99, AMMP−2 = 0.001
   δMMP−9 = 0.04, αMMP−9 = 0.44, κMMP−9 = 4.0E – 06, nMMP−9 = 2.88 [32,44]
   MMMP−9 = 0.002 pg cell−1 6hr−1, DMMP−9 = 87, AMMP−9 = 0.003, DMMP−1 = 80.6
HHS Vulnerability Disclosure