Table 2.

Parameters used to simulate the experimental data to Case (B) model, and some of the results. The simulation was performed only for the full microwave field strength (3.5 MHz) with the measured parameters T_B = 7.4 s, ɛ_∞ = 94, and $T_{1I}^{\mathrm{obs}}=13.7\mathrm{s}$.

	$\frac{N_I^{\left(n\right)}}{N_S}$	$\frac{N_I^{\left(b\right)}}{N_I^{\left(n\right)}}$	$\begin{array}{c}{k}_{\mathrm{DNP}}\hfill \\ \left({\mathrm{s}}^{-1}\right)\hfill \end{array}$	$\begin{array}{c}{k}_{\mathrm{SD}}\hfill \\ \left({\mathrm{s}}^{-1}\right)\hfill \end{array}$	$\begin{array}{c}{T}_{1I}^{\left(n\right)}\hfill \\ \left(\mathrm{s}\right)\hfill \end{array}$	$\begin{array}{c}{T}_{1I}^{\left(b\right)}\hfill \\ \left(\mathrm{s}\right)\hfill \end{array}$
Lower starting bound	1	1	0	0	0	0
Upper starting bound	1000	1000	1	2	30	300
Max. value for fit	4537	4.4	3.9	0.16	668.1	10.1
Min. value for fit	340	0.6	0.1	0.03	15.1	4.6
Example fit	519	3.0	1.0	0.03	45.6	9.3