Table 1.
Material quantities for a temperature probe, constant heat probe, heat pulse probe and voltage regulator.
| Item | Temp. Probe | Const. Heat Probe | Heat Pulse Probe | Voltage Regulator |
|---|---|---|---|---|
| Pipette (10 μL) | 1 ea. | 1 ea. | 1 ea. | — |
| Heat shrink tubing | 2 cm | 2 cm | 2 cm | — |
| Stainless steel needle | 1 ea. | 1 ea. | 1 ea. | — |
| Cyanoacrylate | 0.015 mL | 0.015 mL | 0.005 mL | — |
| PTFE tape | 5 cm | 15 cm | 5 cm | — |
| Chromel TC wire | 5.5 cm | 5.5 cm | — | — |
| Constantan TC wire | 5.5 cm | 5.5 cm | — | — |
| Type E TC extend wire | 10 cm | 10 cm | — | — |
| NiCr heater wire | — | 50.8 cm | 22.7 cm | — |
| Heater extend wire | — | 12 cm | 12 cm | — |
| Electrical tape | — | 5 cm | 5 cm | — |
| Resistor (240 Ω) | — | — | — | 2 ea. |
| Capacitor (0.1 μF) | — | — | — | 4 ea. |
| Voltage reg. (LM317) | — | — | — | 2 ea. |
| Potentiometer | — | — | — | 2 ea. |
| Dual pc board | — | — | — | 0.5 ea. |
| Extend wire | — | — | — | 20 cm |