Skip to main content
. 2012 Jan 26;13:1. doi: 10.1186/1467-4866-13-1

Table 1.

Experimental matrix, calculated CO2 fugacity, precipitation rate (R), curvature (a) of titrant volume vs. time plots (described in text), average mol % Sr and DPSr2+.

Reactor Solution composition Results

Experiment
ID*
r (aCO32-/aCa2+) Ω CaCl2 (M) NaHCO3 (M) log CO2 (g) R Ave (μmol/m2/min) ± StdErr a(Curvature) Sr (mol %) DPSr2+**
IR-1(6) 0.0032 9.0 0.009 0.001 -3.85 60.6 ± 6.6 3.5E-04 0.14 0.086 ± 0.01(4)
IR-2(3) 0.0315 9.3 0.003 0.003 -3.34 41.3 ± 3.4 1.1E-04 - --
IR-3(10) 0.0728 9.2 0.002 0.0045 -3.16 64.1 ± 3.9 8.2E-05 0.47 0.066 ± 0.01(4)
IR-4(8) 0.1120 10.0 0.0017 0.0058 -3.05 59.0 ± 1.1 3.1E-05 0.68 0.078 ± 0.01(4)
IR-5(4) 0.1528 10.4 0.0015 0.0069 -2.98 64.2 ± 1.3 3.1E-05 1.09 0.105 ± 0.01(4)
IR-6(10) 0.3062 8.9 0.001 0.009 -2.86 74.5 ± 4.8 9.8E-05 1.53 0.102 ± 0.02(4)
IR-7(7) 0.5336 9.4 0.0008 0.0122 -2.73 58.8 ± 2.7 1.5E-07 1.12 0.081 ± 0.01(4)
IR-8(8) 0.7312 9.0 0.00068 0.014 -2.67 50.8 ± 2.6 -3.8E-05 1.03 0.081 ± 0.01(4)
IR-9(8) 0.9624 8.9 0.0006 0.016 -2.61 62.3 ± 4.4 -3.1E-05 0.45 0.091 ± .001(3)
R-10(6) 1.8220 9.7 0.00048 0.023 -2.45 46.3 ± 9,6 -7.9E-05 0.12 0.053 ± .001(2)
IR-11(5) 4.1500 7.6 0.0003 0.031 -2.33 0.0 NA - --

Numbers in parentheses indicate *total number of replicates per experimental condition and **number of replicates used for strontium distribution coefficient calculations. The "--"sign is to indicate experiments where no Strontium was added. NA = Rate data not measured