Table 2. Summary of Soil Leaf 1 and Soil Leaf 2 Experiments.
| Soil Leaf 1 | Soil Leaf 2 | |||||||||||
| Min | Max | Ratio | Mean | SD | Heritability | Min | Max | Ratio | Mean | SD | Heritability | |
| Li | 4.77 | 9.00 | 1.9 | 6.94 | 0.99 | 0.36 | 4.90 | 9.44 | 1.9 | 7.22 | 1.08 | 0.30 |
| B | 143.58 | 338.38 | 2.4 | 241.46 | 33.81 | 0.39 | 60.81 | 112.55 | 1.9 | 83.76 | 8.89 | 0.54 |
| Na | 439 | 2908 | 6.6 | 994 | 462 | 0.83 | 325 | 2395 | 7.4 | 798 | 451 | 0.81 |
| Mg | 13612 | 23955 | 1.8 | 19541 | 1909 | 0.63 | 10752 | 16304 | 1.5 | 13454 | 1182 | 0.66 |
| P | 7768 | 16597 | 2.1 | 11425 | 1548 | 0.39 | 6275 | 10905 | 1.7 | 8360 | 945 | 0.59 |
| S | NA | NA | NA | NA | NA | NA | 7435 | 14455 | 1.9 | 10719 | 1535 | 0.48 |
| K | 42876 | 81804 | 1.9 | 56689 | 7774 | 0.47 | 20773 | 48153 | 2.3 | 31377 | 4730 | 0.52 |
| Ca | 25137 | 41702 | 1.7 | 35288 | 3187 | 0.54 | 21322 | 32937 | 1.5 | 27361 | 2213 | 0.48 |
| Mn | 70 | 189 | 2.7 | 116 | 22 | 0.31 | 66 | 162 | 2.4 | 99 | 18 | 0.41 |
| Fe | 77 | 110 | 1.4 | 91 | 7 | 0.33 | 52 | 71 | 1.4 | 61 | 4 | 0.26 |
| Co | 0.45 | 1.64 | 3.6 | 0.86 | 0.22 | 0.38 | 0.79 | 2.18 | 2.7 | 1.33 | 0.27 | 0.40 |
| Ni | 1.45 | 2.57 | 1.8 | 2.03 | 0.22 | 0.18 | 1.32 | 4.37 | 3.3 | 3.01 | 0.66 | 0.19 |
| Cu | 2.04 | 5.27 | 2.6 | 3.33 | 0.63 | 0.24 | 0.56 | 1.50 | 2.7 | 1.00 | 0.21 | 0.21 |
| Zn | 51 | 157 | 3.1 | 90 | 17 | 0.52 | 35 | 96 | 2.7 | 70 | 11 | 0.60 |
| As | 0.16 | 1.04 | 6.5 | 0.35 | 0.10 | 0.29 | 0.12 | 0.35 | 3.0 | 0.21 | 0.05 | 0.19 |
| Se | 12.73 | 28.86 | 2.3 | 17.99 | 2.77 | 0.46 | 4.74 | 9.37 | 2.0 | 6.74 | 0.90 | 0.34 |
| Rb | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Mo | 0.29 | 4.55 | 15.8 | 1.77 | 0.92 | 0.62 | 0.26 | 10.3 | 40.2 | 2.60 | 1.53 | 0.56 |
| Cd | 1.69 | 5.04 | 3.0 | 3.29 | 0.74 | 0.34 | 2.16 | 5.68 | 2.6 | 3.43 | 0.78 | 0.45 |
| S/Se ratio | NA | NA | NA | NA | NA | NA | 1306 | 1939 | 1.5 | 1557 | 128 | 0.27 |
| K/RB ratio | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Minimum (Min), maximum (Max), Max/Min (Ratio), mean and standard deviation (SD) values are calculated off the outlier removed, normalized line averages. Italics: The line factor was not significant in an ANOVA of a linear model for that element. Elements not measured in a given experiment are noted with an ‘NA’.