Skip to main content
. Author manuscript; available in PMC: 2013 May 15.
Published in final edited form as: J Polym Sci B Polym Phys. 2012 Mar 4;50(10):724–737. doi: 10.1002/polb.23056

Figure 5.

Figure 5

DSC curves for each foam formulation. A variation in Tg of approximately 45–70 °C was achieved by varying the ratio of HPED to TEA in the foam formulation. A higher HPED content gave a higher glass transition value. This is likely due to the increase in rotational steric hinderance due to secondary hydroxyl and increase in crosslink density due to use of tetrafunctional HPED.