Table 2.
Phase space positions and resulting dynamics of additional localized activity injections into LO, PB, and RD networks.
| LO | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| g = 3.5 | g = 4.0 | g = 4.5 | g = 5.0 | 5.5 | ||||||
| νi = 0.3 | νi = 0.6 | νi = 0.3 | νi = 0.6 | νi = 0.3 | νi = 0.6 | νi = 0.3 | νi = 0.6 | νi = 0.3 | νi = 0.6 | |
| ν = 9.6, Ø = 0.6 | – | – | – | – | – | – | – | – | SR,Mp | SR |
| ν = 9.6, Ø = 0.3 | – | – | – | – | – | – | – | – | SR | SR |
| ν = 9.5, Ø = 0.6 | – | – | – | – | SR | Mp | SR | SR | M,Wyp | SR |
| ν = 9.5, Ø = 0.3 | – | – | – | – | SR | SR | SR | SR | SR | SR |
| ν = 9.4, Ø = 0.6 | Mp | Mp | SR | SR | SR | Mp | SR | SR | – | – |
| ν = 9.4, Ø = 0.3 | SR | SR/Mp | SR | SR | SR | SR | SR | M,Wxp | – | – |
| PB | ||||||||||
| ν = 9.9, Ø = 0.6 | – | – | – | – | SR | SR | SR | SR/M | SR/M | SR/SI/M |
| ν = 9.9, Ø = 0.3 | – | – | – | – | SR | SR/sAI | SR/SI/M | SR/SI/M | SR1/SI | sAI |
| ν = 9.8, Ø = 0.6 | – | – | – | – | SR | SR | SR | SR | SR/M | SR/M |
| ν = 9.8, Ø = 0.3 | – | – | – | – | SR/SI | SR/sAI | SR | sAI | sAI | AI |
| ν = 9.7, Ø = 0.6 | SR | SR | SR | SR | SR | SR/SI | – | – | – | – |
| ν = 9.7, Ø = 0.3 | SR | SR | SR/SI | SR1/sAI | SR/SI | SR1/sAI | – | – | – | – |
| ν = 9.6, Ø = 0.6 | SR | SR | SR | SR | SR | SR/SI | – | – | – | – |
| ν = 9.6, Ø = 0.3 | SR | SR/SI | SR | SR1/sAI | SR | SR1/sAI | – | – | – | – |
| RD | ||||||||||
| ν = 10.25, Ø = 0.6 | – | – | SRs | SR | SI | SR | – | – | – | – |
| ν = 10.25, Ø = 0.3 | – | – | AI/SI | SI | AI/SI | SI | – | – | – | – |
| ν = 10, Ø = 0.6 | SR | SR | SI | SR | SI | SR | – | – | – | – |
| ν = 10, Ø = 0.3 | SI | SI | AI/SI | AI/SI | AI/SI | SI | – | – | – | – |
| ν = 9.75, Ø = 0.6 | AI | SR | AI/SI | SR | AI | SI | – | – | – | – |
| ν = 9.75, Ø = 0.3 | AI | AI/SI | AI | SRs | AI | AI | – | – | – | – |
All injections are spatially restricted to a radius of either Ø = 0.6 or 0.3 mm with a Poissonian spike rate of either vi = 0.3 v or 0.6 v. Injections are always applied in the (s)AI state, see Figure 2. The entries indicate the induced activity pattern. The index p indicates a permanent change. Apart from the well-known SR, SI, and AI states, we also observed W (plane waves), M (mixed dynamical patterns, e.g., overlapping waves), a stripy AI state (sAI), and several mixtures between different states (e.g., SR/SI, AI/SI), cf. Figure 7. SR1/sAI indicates one burst in an otherwise sAI state.