Skip to main content
. Author manuscript; available in PMC: 2013 Aug 1.
Published in final edited form as: Biomed Microdevices. 2012 Aug;14(4):625–629. doi: 10.1007/s10544-012-9643-x

Fig. 2.

Fig. 2

Image of parallel channel architecture for capturing cells. Image of 16 channel microfluidic device used for cell capture. Every two channels lead to a well for loading reagents. All channels are tied to a single output where negative pressure is applied. Channels are 25 µm tall and 300 µm wide. Channels fabricated in PDMS and bonded to glass substrate