Skip to main content
. 2005 May 24;15(6):849–856. doi: 10.1007/s00586-004-0874-2

Table 1.

Material parameters for the ligaments: the ligaments are abbreviated in the following way; ITL, SSL, ISL, LF, ALL, PLL and CL (see section above entitled ‘Continuum mechanical modeling and material properties’)

  ITL LF PLL SSL, ISL, ALL, CL
k1 (MPa) 13.1 6.0 6.0 1.5
k2 [1] 21.0 0.11 0.1 0.1
c (MPa) 1.3 1.0 1.0 1.0

The values were obtained by fitting model 2 and 3 to the curves documented in [15]