Lumber mills (MLMB)
|
Transfer of C from whole logs primarily into solid wood products over 6 mm in thickness.
|
Chip mills (MC)
|
Transfer of whole logs primarily into chips for pulp and paper.
|
Plywood and veneer mills (MPLY)
|
Transfer of whole logs primarily into laminated veneer lumber, veneer and plywood.
|
Panel mills (MPNL)
|
Transfer of C that may come from whole logs for oriented strand board or as wood waste from other mills for use in particleboard or fibre board.
|
Lumber (PPLMB)
|
C in dimensional lumber.
|
Chips (PPCHP)
|
C in chips, predominantly softwood.
|
Plywood (PPPLY)
|
C in plywood with plys of 6 mm or less in thickness and veneer of 6 mm or less in thickness.
|
Panels (PPPNL)
|
C in oriented strand board, fiberboard, particleboard and panels.
|
Mechanical mills (MP M)
|
C in chips input to mechanical and semi-chemical pulping simulation
|
Chemical mills (MP C)
|
C in chips input to chemical pulping technologies simulation
|
Combustion fuel (B)
|
C as chips, solid wood, sawdust, black-liquor, waste wood or paper intended to be burned.
|
Retirement (R)
|
Loss of C from in-use pools into waste or recycled back into in-use pools.
|
Aerobic decay (Ae)
|
Decomposition in an oxygen-rich environment.
|
Anaerobic decay (Anae)
|
Decomposition without oxygen.
|
Potential CH4 released (pot CH4)
|
The amount of methane produced by the simulation of anaerobic decay.
|
Oxidation (O)
|
A molecular reaction where hydrogen is lost and oxygen is added.
|
LFGM
|
Landfill gas collection and flaring |