Skip to main content
. 2012 Aug 21;54(1):174–181. doi: 10.1093/jrr/rrs067

Fig. 1.

Fig. 1.

An experimental setup. (a) Two EBT2 film strips on the right and left sides, two MOSFET detectors on the superior and the inferior sides, covered by 3-mm thickness thermoplastic for an eyelid simulation. The beam isocenter is at the top center of the steel knob. (b) A vertical EBT2 film is sandwiched with solid phantoms under the eye shield for the dose distribution measurements.