Skip to main content
. Author manuscript; available in PMC: 2014 Feb 1.
Published in final edited form as: Biomed Microdevices. 2013 Feb;15(1):171–181. doi: 10.1007/s10544-012-9710-3

Fig. 2.

Fig. 2

Device fabrication starts with replica molding of microposts (steps 1–6) followed by inversion of the replica on a PDMS backing (step 7), deposition of the thermoresponsive sacrificial layer (steps 8–9), cell seeding (step 10), and dissolution of the sacrificial support layer (step 11)