Table 5.
Weibull tensile test results.
Machining parameter | Number of samples | ω | η | σmin (kgf) | σmax (kgf) | R2 | |||
---|---|---|---|---|---|---|---|---|---|
| |||||||||
Scanning Path | Power (W) | Velocity (cm/s) | |||||||
| |||||||||
No. 1 | Parallel | 4 | 12.6 | 30 | 0.591 | 0.878 | 0.14 | 3.95 | 0.913 |
No. 2 | 5 | 12.6 | 0.922 | 1.476 | 0.25 | 4.05 | 0.833 | ||
No. 3 | 5 | 15.75 | 0.753 | 0.942 | 0.1 | 4.1 | 0.969 | ||
No. 4 | 6 | 15.75 | 1.008 | 1.368 | 0.1 | 5.9 | 0.963 | ||
|
|||||||||
No. 5 | Vertical | 4 | 9.45 | 0.886 | 1.186 | 0.25 | 4.15 | 0.974 |