Skip to main content
. 2013 Jul 31;3:2326. doi: 10.1038/srep02326

Figure 1. Morphology and surface composition of the stainless steel mesh after the LbL assembly of (silicate/TiO2)*20 coating.

Figure 1

SEM images of the original stainless steel mesh (a), and the (silicate/TiO2)*20 coated mesh (b). Insets in (a) and (b) show the magnified view of the knitting wire surfaces. (c) EDS spectrum of the (silicate/TiO2)*20 coated mesh. The insets in (c) show the SEM-EDS elemental mapping of Si and Ti.