Skip to main content
. Author manuscript; available in PMC: 2013 Dec 16.
Published in final edited form as: IEEE Trans Biomed Eng. 2010 Nov 22;58(3):10.1109/TBME.2010.2093896. doi: 10.1109/TBME.2010.2093896

TABLE III.

Errors in Magnitude and Angle for the Two Models Using the Method of Constraints for the Concatenated Atlas

Mesh without dural septa Mesh with dural septa
Magnitude (mm) Angle (degrees) Magnitude (mm) Angle (degrees)
I 2.5±0.6 29.2±11.1 1.8±0.6 13.7±8.6
II 2.9±1.5 13.4±9.9 2.9±2.0 15.1±12.8
III 6.0±1.9 71.0±19.8 5.8±2.4 66.6±18.9

I, II, and III represent the three regions for selected points shown in Fig. 7(a).