Table 2.
Four-point monotonic test data, incorporating the area moment of inertia
| Manufacturer | Yield load (N) | Area moment of inertia (mm4) | Normalized bending strength (N/mm3) | Normalized bending structural stiffness (N/mm2) |
|---|---|---|---|---|
| HIC(1) | 606.5 ± 55.5 | 29.9 ± 1.0 | 325.6 ± 36.7 | 185100 ± 6273 |
| HIC(2) | 632.5 ± 46.0 | 28.2 ± 0.5 | 359.4 ± 23.2 | 182200 ± 6835 |
| LMIC(A1) | 530.2 ± 59.7 | 32.7 ± 0.4 | 259.5 ± 29.8 | 188300 ± 8039 |
| LMIC(A2) | 817.5 ± 19.6 | 34.5 ± 0.4 | 379.3 ± 9.6 | 203600 ± 2295 |
| LMIC(A3) | 644.5 ± 252.1 | 41.1 ± 5.2 | 245.7 ± 63.9 | 183800 ± 8643 |
| LMIC(B1) | 322.5 ± 37.2 | 25.0 ± 1.5 | 207.1 ± 24.7 | 190400 ± 13190 |
| LMIC(B2) | 415.8 ± 30.6 | 28.7 ± 0.7 | 231.6 ± 15.7 | 192300 ± 7779 |
| LMIC(B3) | 342.8 ± 29.9 | 28.3 ± 2.9 | 197.3 ± 37.6 | 204400 ± 24550 |