Skip to main content
. 2013 Jun 26;472(2):564–571. doi: 10.1007/s11999-013-3115-3

Table 2.

Geometric differences were found among the three taper designs

Taper design Taper angle (degrees) Distal diameter (mm) Contact length (mm)
Type 1 4.0 ± 0.1*, 12.4 ± 0.3* 12.4 ± 4.8
11/13 6.0 ± 0.01* 13.0 ± 0.2* 19.0 ± 1.6*
12/14 5.6 ± 0.2 13.9 ± 0.4 13.3 ± 3.5

Values are mean ± SD; * significant different from 12/14, p < 0.05; significant different from 11/13, p < 0.05.