Figure 2.

Determining possible solutions for w, q, and k_bend using the Constant FB approach on the fusion data of Imai et al. (13) at ρ_HA,200 and using rate values in Table 1 for pH 5.2. The ratio D_test/D_crit is used to determine if simulations match with the data of Imai et al. If D_test/D_crit is <1, simulations are accepted. An example of an invalid solution is shown when w = 3 and q = 3 (olive green line), as noted by D_test/D_crit being >1. To see this figure in color, go online.