Skip to main content
. 2014 Apr 1;9(4):e93618. doi: 10.1371/journal.pone.0093618

Figure 2. Fabrication of the stamped Petri dish.

Figure 2

PDMS mold (A) employed for stamping microwell arrays in polystyrene-based Petri dish by hot embossing and presenting three arrays of 42 pits (200 μm height; 400 μm diameter, and 800 μm spacing). (B). Picture of a Petri dish after hot embossing of the microwell array. (C) Microscopy picture showing 21 independent wells in the polystyrene substrate.