Skip to main content
. Author manuscript; available in PMC: 2014 Apr 29.
Published in final edited form as: IEEE Trans Med Imaging. 2013 Oct 4;33(2):332–339. doi: 10.1109/TMI.2013.2284657

Fig. 1.

Fig. 1

(a) Design of an individual VIP detector module. Blue piece at one end of the kapton PCB is a connector to couple the detector module to a bus of signals. (b) VIP module block. (c) VIP ring section formed from four module blocks connected to the same bus (black region). (d) General view of the VIP scanner. Due to the trapezoidal shape of the CdTe detectors the system does not have cracks in between ring sections.