Table 2.
Parameter values used in the simulation WSN.
| Parameters | Description |
|---|---|
| Transmission Range | 30 m |
| sensor types | BT node sensors |
| Sensing Range of node | 10 m |
| Initial energy of node | 40 Joules |
| Bandwidth of node | 50 Kb/S |
| Number of sensors | 105 BT node rev-3 |
| Size of network | 300 × 300 square meters |
| Size of each region | 75 × 75 square meters |
| Packet transmission rate | 30 Packets/Sec |
| Data Packet size | 4, 8, 16, 32, 64, 128, 256 bytes |
| Mobility model | Pheromone termite mobility model |
| Simulation time | 35 min |
| Initial pause time | 30 s |
| Tx energy | 16 mW, |
| Rx energy | 12 mW |
| Energy dissipation: actuation | 0.022 mJ |
| Power intensity | −20 to 12 dBm |
| Minimum Cycle time, T | 340 ms |
| Start time of BN-MAC | (0, 30) s |
| Sink location in each region | (60, 40) |
| MAC protocol | BN-MAC |
| Other MAC protocols | Z-MAC, A-MAC, Speck-MAC, ADC-SMAC, LPRT-MAC |
| Type of protocols | Hybrid protocols |
| Deployed models | IDM, LDSNS and AAS models |
| Mobility | 0.5 to 3.5 m/s |
| Delivery of data at varying sensing range | 100, 200, 300, 400, 500, 600 and 700 m |
| Routing Protocol | EAP |