Table 2.
Measurement of floaters and position of gauze on the floater, as tested in the floater optimization tests
| Floater type | Outer ø* in cm | Inner ø* in cm | Height in cm | Position of gauze |
|---|---|---|---|---|
| Floater-I (small) |
5,5 |
3,5 |
6,5 |
Outer ring of floater covered with gauze |
| Floater-II (medium) |
10,0 |
3,5 |
5,0 |
Outer ring of floater covered with gauze |
| Floater-III (large) |
16,0 |
3,5 |
5,0 |
Outer ring of floater covered with gauze |
| Floater-IV (ring) |
16,0 |
12,0 |
5,0 |
Outer and inner ring of floater covered with gauze |
| Floater-V (pins) | 16,0 | 14,0 | 1,5 | Gauze on top of floater, stabilized with pins |
*Ø = diameter.