Table 1.
Dimensions (nm) of lipin particles and their respective footprints on the supported bilayer
Particlea | Particle Horizontal Width b |
Particle Vertical Width b |
Footprint Horizontal Width |
Footprint Vertical Width |
---|---|---|---|---|
#1 | 71.7c | 49.0 | 78.3 | n.d.d |
#2 | 42.4 | 42.6 | 48.9 | n.d.e |
#3 | 55.5 | 45.8 | 58.7 | 52.3 |
#4 | 52.2 | 42.5 | 52.2 | 45.7 |
Particle numbers correspond to the particles as numbered in Figure 6.
Particle widths were measured at the base (full height) not the half height.
The profile of this particle suggests it is two poorly resolved lipin particles sitting adjacent to one another in the horizontal direction resulting in this large horizontal measurement.
Not determined because part of the footprint is occupied by the particle which was removed during imaging.
Not determined because this footprint appears as a doublet in the vertical direction possibly because the particle was pushed ahead of the probe during imaging and created two footprints.