Skip to main content
. 2014 May 20;8:33. doi: 10.1186/1752-153X-8-33

Figure 2.

Figure 2

ELSD optimisation for HPLC analysis of solutes. Methyl laureate was used as analyte for the optimization experiment. The Signal over Noise ratio (S/N) was monitored regarding the following factors: the detector temperature (A), the gas flow rate in the detector (B), and the flow rate of the mobile phase (C). Standard conditions are mobile phase flow rate of 1 ml/min, 1.3 L/min gas flow to the detector, detector temperature is 38°C, and gain of the detector is set to 1.