Table 1.
Summary of the performed image acquisition parameters
| Device | Number of images | Resolution [pixel × pixel] | Object of imaging | Additional comments |
|---|---|---|---|---|
| NICON E 600 microscope (lens: Plan Fluor 100×/130 Oil, eyepiece 10×/22) |
40 |
1024 × 1024 |
Determination of the extent of proliferation in the regenerating rat liver cells |
The test material was analysed under the microscope |
| Systems for 3D measurement of points of the human body developed in the Department of Photogrammetry and Computer Remote Sensing WGGiIŚ AGH |
800 |
1200 × 1600 |
Evaluation of postural defects |
Images of selected places of the human body, signalled with Styrofoam balls-markers, were obtained using two focus free compact cameras |
| OCT SS-1000 CASIA, OCT Zeiss Visante OCT and SOCT Copernicus Optopol Tech. SA |
100'000 |
256 × 1024 |
Evaluation of retinal layer thickness and the iridocorneal angle of the anterior segment of the eye |
The images are acquired for the measuring range of 8 × 16 mm |
| AGEMA 470 and/or 640 AGEMA digital camera QV - 400 |
503 |
140 × 140 320 × 240 600 × 400 |
Evaluation of uneven temperature distribution around paraspinal areas |
Patients prior to the test were stripped to the waist and stayed in a room with air temperature of 21°C, in a sitting position without any back support for about 20 minutes. Next, each of them stood with their back to the camera at a distance of 2 m from the lens |
| Flir SC5200 infrared camera with a photon detector with 3-5 μm spectral range, |
80 |
320 × 256 |
Evaluation of the correctness of performing ablative and non-ablative treatments in cosmetology |
Forcing thermal changes of the skin was done using CO2RE laser with a wavelength of 10600 nm; pulse mode of the laser beam emission, energy density of 4,5 J/cm2, pulse energy of 1–150 mJ, pulse frequency of 16,7 kHz, spot size - 120 μm or 150 μm. |
| Topcon 3D OCT-2000 |
25'200 |
884 × 512 |
Evaluation of Thickness loss of tooth enamel |
Images were obtained in vitro by performing on 180 teeth 7 processing steps: tooth without interference, polishing with paste, etching, application of adhesive system, orthodontic bracket attachment, orthodontic bracket removal, cleaning of adhesive residue. |
| Corvis tonometer | 13'400 | 200 × 576 | Evaluation of the mechanical properties of the cornea and intraocular pressure | Subjects aged 17–63 were healthy (32 people including 16 women) or ill (16 people including 9 women). The ill patients had either AMD or other diseases that cause abnormal pressure in the eye |