Table 1.

The structural properties of Restorelle (n=5) and UltraPro (n=4) subjected to a uniaxial tensile testing protocol. Mesh samples were loaded to failure along two perpendicular directions orientation 1 (O1) and orientation 2 (O2), and compared utilizing a Student's t-test (p-value<0.05). O1 represents the direction prolapse meshes are typically implanted.

Mesh	Failure Load (N)	Relative Elongation (%)	Low Stiffness (N/mm)	High Stiffness (N/mm)	Inflection Point (%)
Restorelle Orientation 1	22.7 ± 2.82	68.4 ± 6.34	0.177 ± 0.033	0.582 ± 0.082	29.1 ± 2.1
Restorelle Orientation 2	24.3 ± 3.32	68.4 ± 7.12	0.198 ± 0.038	0.613 ± 0.051	28.8 ± 2.2
P-value	0.44	0.99	0.37	0.49	0.80
UltraPro Orientation 1	7.83 ± 0.69	87.9 ± 5.62	0.009 ± 0.002	0.236 ± 0.019	46.5 ± 5.2
UltraPro Orientation 2	122.3 ± 13.8	54.4 ± 3.27	0.258 ± 0.085	4.75 ± 0.295	22.6 ± 1.86
P-value	<0.001	<0.001	0.009	<0.001	<0.001