Table 2. SAXS data analysis.
Construct | Estimated MW (kDa) | Calculated numberof subunits | Rg (Å) | Concentration(mg/ml)a | |
based on I0 of water | based on Porod volume | ||||
WT | 31.4 | 38.1 | 2.2 | 27.5±1.8 | 0.61 |
ΔN11 | 31.2 | 39.9 | 2.5 | 31.9±2.8 | 0.65 |
Δ11–20 | 25.7 | 29.5 | 1.8 | 25.2±1.1 | 0.47 |
Δ21–30 | 32.8 | 35.9 | 2.2 | 28.7±0.7 | 0.89 |
Δ31–40 | 28.2 | 32.9 | 2.0 | 26.7±2.2 | 0.79 |
Δ41–50 | 34.8 | 36.6 | 2.3 | 28.2±0.7 | 0.88 |
Δ51–60 | 28.3 | 30.8 | 1.9 | 27.3±1.3 | 0.87 |
Δ61–70 | 51.6 | 56.0 | 3.5 | 33.4±0.5 | 0.77 |
Δ31–35 | 30.9 | 35.3 | 2.2 | 27.4±1.3 | 0.97 |
Q31A | 67.4 | 71.2 | 4.2 | 37.5±0.8 | 1.37 |
Q31L | 64.7 | 72.9 | 4.3 | 38.0±1.2 | 1.31 |
F33A | 29.4 | 38.4 | 2.3 | 30.2±1.0 | 2.32 |
F33Y | 36.8 | 42.6 | 1.9 | 30.9±1.6 | 1.77 |
The concentration for each construct at the peak maximum was calculated using the maximum absorbance at 280 nm as it eluted from the column and their calculated absorbance coefficients.