Skip to main content
. Author manuscript; available in PMC: 2016 Jan 1.
Published in final edited form as: J Biomed Mater Res A. 2014 Mar 26;103(1):211–223. doi: 10.1002/jbm.a.35165

Figure 6.

Figure 6

Digital optical micrograph of a CoCrMo head where ICI corrosion has taken place on a non-articulating machined surface adjacent to the modular taper bore. Machining lines are damaged by the ICI corrosion process in patterns consistent with the ICI corrosion seen in earlier examples on articular surfaces. The modular taper bore is about 3 mm to the lower right.