Skip to main content
. Author manuscript; available in PMC: 2014 Sep 30.
Published in final edited form as: Nat Protoc. 2014 Feb 27;9(3):694–710. doi: 10.1038/nprot.2014.044

Figure 6.

Figure 6

Schematic of the production of CTC-iChip2. (ad) Schematic showing the production steps of CTC-iChip2 in the clean room in device view (top) or inlet/outlet view (bottom panel). Thin PDMS is produced in Steps 1–13 and bonded to a second layer of thick PDMS pieces in Steps 14–16; inlet and outlets are punched in Step 17 and bonded to glass slides in Steps 18–22.