Skip to main content
. Author manuscript; available in PMC: 2016 Apr 1.
Published in final edited form as: J Magn Reson Imaging. 2014 Apr 4;41(4):1104–1114. doi: 10.1002/jmri.24629

Figure 1.

Figure 1

Prostate sectioning box made of Acrylic and Teflon. The box is shown with a spherical prostate model and the movable walls on the left (WL) right (WR) and base (WB) are pushed in to hold the model securely. Each moveable wall is held in place with a locking screws SL, SR and SB, respectively. A standard pathology blade is inserted through the milled slits in the acrylic pieces that make up the left and right walls. Each successive axial cut through the prostate requires passing through the next slit in the side walls. The tolerance is such that the blade can only traverse through the corresponding slit on the opposite side.