Table 1. Summary of univariate morphological variation among mensural characters in Limnonectes larvaepartus.
Limnonectes larvaepartus | |||
Males (31) | Females (30) | Holotype | |
Snout-Vent Length (SVL) | 39.8+4.7 | 41.2+3.1 | 48.0 |
Range | 31.3−48.3 | 35.7−47.5 | - |
Head Length (HL) | 17.6+2.0 | 17.9+1.3 | 21.5 |
Head Width (HW) | 15.4+2.1 | 15.1+1.5 | 18.9 |
Snout Length (SL) | 7.0+0.9 | 7.2+0.5 | 8.2 |
Eye-Narial Distance (EN) | 3.6+0.5 | 3.9+0.4 | 4.0 |
Nostril-Tip of Snout (NT) | 3.6+0.4 | 3.8+0.4 | 4.3 |
Internarial Distance (IN) | 4.5+0.6 | 4.4+0.4 | 4.9 |
Snout Width at Eye (SWE) | 10.5+1.2 | 10.6+1.0 | 12.2 |
Snout Width at Nostril (SWN) | 6.0+0.8 | 5.8+0.7 | 7.5 |
Eye-Tympanum Distance (ET) | 1.8+0.5 | 1.6+0.4 | 1.7 |
Odontoid Process Length (OP) | 2.0+0.3 | 1.6+0.2 | 2.1 |
Tympanum Diameter (TY) | 3.1+0.5 | 3.3+0.4 | 3.6 |
Interorbital Distance (IO) | 3.0+0.5 | 3.0+0.4 | 3.9 |
Eye Diameter (EY) | 7.2+0.8 | 7.4+0.5 | 8.7 |
Femoral Length (FE) | 21.1+2.6 | 22.0+2.4 | 23.7 |
Tibial Length (TI) | 22.7+2.8 | 24.1+2.3 | 23.5 |
Foot Length (FL) | 32.1+3.6 | 33.5+3.0 | 36.2 |
Humeral Length (UA) | 11.5+1.0 | 11.4+1.1 | 13.5 |
Lower Arm Length (LA) | 8.4+1.0 | 9.1+1.0 | 9.5 |
Hand Length (HA) | 9.7+1.2 | 9.9+1.0 | 11.8 |
HL/SVL | 0.44+0.02 | 0.44+0.03 | 0.45 |
HW/SVL | 0.39+0.02 | 0.37+0.02 | 0.39 |
SL/SVL | 0.18+0.01 | 0.18+0.01 | 0.17 |
EN/SVL | 0.09+0.01 | 0.09+0.01 | 0.08 |
IN/SVL | 0.11+0.01 | 0.11+0.01 | 0.10 |
SWE/SVL | 0.26+0.02 | 0.26+0.01 | 0.25 |
SWN/SVL | 0.15+0.01 | 0.14+0.01 | 0.16 |
ET/SVL | 0.04+0.01 | 0.04+0.01 | 0.04 |
OP/SVL | 0.05+0.01 | 0.04+0.01 | 0.04 |
TY/SVL | 0.08+0.01 | 0.08+0.01 | 0.08 |
IO/SVL | 0.08+0.01 | 0.07+0.01 | 0.08 |
EY/SVL | 0.18+0.01 | 0.18+0.01 | 0.18 |
FE/SVL | 0.53+0.03 | 0.53+0.03 | 0.49 |
TI/SVL | 0.57+0.04 | 0.59+0.04 | 0.49 |
PL/SVL | 0.81+0.03 | 0.81+0.04 | 0.75 |
SL/SWE | 0.67+0.07 | 0.69+0.07 | 0.67 |
IN/SWN | 0.74+0.08 | 0.76+0.08 | 0.65 |
HW/HL | 0.87+0.07 | 0.84+0.08 | 0.88 |
SL/HW | 0.46+0.05 | 0.48+0.03 | 0.43 |
IO/IN | 0.68+0.07 | 0.67+0.08 | 0.80 |
TI/TD | 3.6+0.4 | 3.8+0.2 | 3.6 |