Table 2.
Linear and volumetric results calculated from the axial profiles
| Component | Maximum observed depth of material loss (μm) | Calculated volumetric material loss (mm3) | Calculated rate of material loss (mm3/year) |
|---|---|---|---|
| 1 | 6.5 | 0.12 | 0.02 |
| 2 | 5.0 | 0.23 | 0.11 |
| 3 | 4.9 | 0.17 | 0.07 |
| 4 | 3.2 | 0.22 | 0.15 |
| 5 | 1.7 | 0.02 | 0.00 |
| 6 | 22.4 | 0.27 | 0.43 |
| 7 | 6.2 | 0.66 | 0.14 |
| 8 | 6.4 | 0.07 | – |
| 9 | 17.3 | 1.70 | 0.29 |
| 10 | 4.1 | 0.04 | 0.15 |
| 11 | 2.8 | 0.16 | 0.06 |
| 12 | 4.9 | 0.10 | 0.03 |
| 13 | 5.5 | 0.50 | – |
| 14 | 10.3 | 0.62 | 0.62 |
| 15 | 39.3 | 1.55 | 1.23 |
| 16 | 1.5 | 0.17 | – |
| 17 | 2.6 | 0.15 | 0.19 |
| 18 | 5.1 | 0.00 | 0.00 |
| 19 | 4.7 | 0.16 | 0.05 |
| 20 | 10.8 | 0.17 | 0.02 |
| 21 | 51.2 | 0.54 | 0.10 |