| Excite |
HEMA, phosphoric acid, acrylate, (Bis GMA), dimethacrylate, highly dispersed silica, catalysts, stabilizers, ethanol |
Apply a generous amount of Excite. Gently agitate the adhesive for at least 10 s. Dry gently for 1-3 s. Cure for 10 s. |
E30108 |
| Adper Single Bond |
HEMA, BisGMA, dimethacrylate, copolymer with methacrylic function, polyacrylic & polyitaconic acids, photoinitiators, water and ethanol |
Apply 2 consecutive coats of Single Bond, dry gently for 2-5 s. Cure for 10 s. |
3HW |
| Prime & Bond NT |
Resin di and tri methacrylate, amorphous functional silica, PENTA, cetylamine hydrofluoride, photoinitiators, stabilizers, acetone |
Apply 3 consecutive coats of Prime & Bond NT. This surface should remain fully wet for 20 s. Gently dry with air for at least 5 s. Cure adhesive for 10 s. |
534320 |
| Adper Scotchbond Multi Purpose Adhesive |
Bis-GMA, HEMA, initiators |
Apply adhesive and light cure for 10 s. |
5PH |
