Table 1. Examples of model parameters and associated results.

Well #1 mean excess bottom-hole pressure in (MPa)	Well #2 mean excess bottom-hole pressure in (MPa)	Mean effective permeability ( × 10−14 m2)	Thickness of high permeability zone (m)	Producers included?	Boundary conditions	Specific storage ( × 10−6 m−1)	Excess pressure on fault at AZDA, 1 January 2014 (MPa)
0.53	0.17	3	1,000	Yes	Closed	5	0.008
0.53	0.17	3	1,000	Yes	Closed	13	0.02
0.53	0.17	3	1,000	No	Closed	7.3	0.011
4.4	2.96	3	300	No	Closed	7.3	0.14
2.42	1.63	3	300	No	Closed	7.3	0.08
2.42	1.63	3	300	No	Open	7.3	0.015
2.42	1.63	3	1,000	Yes	Closed	13	0.03
2.42	1.63	3	1,000	No	Closed	5	0.05
2.42	1.63	3	1,000	No	Open	5	0.01
2.42	1.63	1	1,000	Yes	Closed	1	0.11
2.42	1.63	1	1,000	Yes	Closed	13	0.1
2.42	1.63	1	1,000	Yes	Closed	7.3	0.11
0.58	0.28	5	1,000	Yes	Open	7.3	0.02
2.42	1.63	5	1,000	Yes	Closed	7.3	0.1
2.42	1.63	10	1,000	Yes	Open	7.3	0.017