Skip to main content
. Author manuscript; available in PMC: 2016 Jun 1.
Published in final edited form as: Nucl Instrum Methods Phys Res A. 2015 Jun 1;784:557–564. doi: 10.1016/j.nima.2014.12.080

Figure 3.

Figure 3

(left) A prototype strip-line board coupled to a LYSO scintillator block. MMCX type connectors are shown on the right end of the board. (center) A PET detector encased inside a cylindrical supporting structure, and the RF coil support. Output signal of the detectors are connected to 5m non-magnetic long cables by 30cm intermediate cables (white colored in figure). (right) A side view of the Bruker BioSpec 94/30 MRI scanner.