Skip to main content
. Author manuscript; available in PMC: 2015 May 7.
Published in final edited form as: Acta Biomater. 2011 May 20;7(9):3277–3284. doi: 10.1016/j.actbio.2011.05.017

Table 1.

Electrospun fiber appearance related to polymer composition.

Polymer Code Composition and Molar Ratio Hard Segment %wt Soft Segment %wt Appearance
PU-1 PCL/LDI/BDA = 1/2/1 29.05 70.95 Weak, yellowed fibers
PU-2 PCL/LDI/BDA = 1/4/3 46.95 53.05 Robust, slightly yellowed fibers
PU-3 PCL/LDI/BDA = 1/8/7 64.78 35.22 Electrospray and drips
PU-4 PCL/BDI/BDA = 1/4/3 39.38 60.62 Unable to melt polymer
PU-5 PCL/BDI/BD = 1/4/3 35.22 64.78 Good quality fibers