. Author manuscript; available in PMC: 2015 May 19.

Published in final edited form as: Proc SPIE Int Soc Opt Eng. 2013 Feb 2;8568:856810. doi: 10.1117/12.2003277

Table 1.

Variable parameters used in the explicit dosimetry model. Approximate values are those used in [3] and serve as a guide for potential range of values BPD parameters.

Parameter (units)	Designation	Fitted Values
ξ (cm²mW⁻¹s⁻¹)	$S_{Δ} (\frac{k_{5}}{k_{5} + k_{3}}) \frac{∊}{h v} (\frac{k_{7} [A] ∕ k_{6}}{k_{7} [A] ∕ k_{6} + 1})$	0.023
σ (μM⁻¹)	$\frac{k 1}{k_{7} [A]}$	8.4×10⁻⁶
β(μM)	$\frac{k_{4}}{k_{2}}$	11.9
δ (mM)	Low [photochemical] correction	33
g (μM/sec)	Maximum oxygen supply rate	0.7
[¹O₂]_{rx, sd}(mM)	[¹O₂]_rx where necrosis is expected	0.42